Blog

30kgs rate 60kgs feed oil and gas burner small waste incinerator for Afghanistan Machine Working setting Oil […]

a burner for our oral clinics.The burner need to follow” Technical Standard NTON 05-015-02 Monitoring as […]

30 August 2013 Last upgraded at 21:18 BST Five councils in south eastern Wales have developed […]

Oil tank with 2000Liters capacity Items/Model TS150(PLC) Picture Principle Waste Incineration Treatment Burn Rate Average 100-150 […]

Capacity Not less than 500Kg/hr.Operation 24hr-7days/week continuous operation.Combustion chamber 2 combustion chamber.Temp. First combustion chamber 800-1000 C. Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C.Combustion Efficiency 99.99%Retention time Of the flow gases not less than 2 Sec in the hot portion.Excess Oxygen concentration Of primary combustion chamber 3-6% max. Refractory The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than 1400 C for the first combustion chamber, and not less than 1600 C for the secandry combustion chamber, and at the same time prevent the Temp. of the outside body of the chamber not higher than 70 C.Doors Should be lined with the same bricks, and the edges lined with special suitable insulating material to prevent any gas escaping, and the doors should be kept under negative pressure during the operation.Air Emission Control System With high destruction and removal efficiency (DRE). Not less than 99.9999 as per KEPA.Wet System If the system equiped with a CEMS washing the flow gas with water, then it should be manufactured from suitable anti corrossion materials, and equiped with pH meter to measure and neutralize the water. It should be able to use the water in closed recycled circuit many times before treating/ discharging into the sewage system in compliance with KEPARS.Chemical dosing It should be equiped with suitable autochemical dosing system to control the pH for the water of the wet scrubber system including sensors.Chimney It should be suitable with the capacity and the technical specifications, with height not less than 12m from ground level. With easy opennable sampling point equal about 3 inch, and the optimum sampling locations is at least 8D downstream direction and 2D upstream from any flow disturbancies.Sampling point […]

Standard 30kgs per hr *** Key chamber( 200Liters) *** Second chamber *** Mix burning chamber *** […]

Containerized Mobile Incinerators for Remote Locations: A Sustainable Waste Management Solution Introduction In remote locations, effective […]

HICLOVER Incinerator/Parts Range Main Feature Medical Waste Incinerators HICLOVER 10-500kgs/Hr.Double Combustion Chambers Single Combustion Chamber Small, Cheap,10-20kgs/Hr. […]

BURNING RATE : -100-150kgs per hour MINIMUM OPERATING TEMPERATURE : 800-1000 oC ( PRIMARY COMBUSTION ) […]

Affordable Pet Cremation Incinerators for Small Pet Crematoriums: A Solution for Respectful and Efficient Pet Disposal […]

we are mobile incinerator china manufacturer. HICLOVER now offer a full range of containerized incineration systems, […]

Burner for Animal Crematory Pig Ranch Version A1200 *** 3 sets Burners *** Good for animals […]

Incinerator yet the measurement of chamber > > 2000 x >> 1200 mm. Prepare for burn […]

Mobile Hazardous Waste Incinerator: A Solution for Safe Disposal of Hazardous Materials When it comes to […]