Posts in September 14, 2025

Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Product Description The […]

Nanjing Clover Medical Technology Co.,Ltd. Tel: +86-25-84610201Mobile: +86-13813931455(WhatsApp)Website: www.hiclover.comEmail: [email protected]: Gangjia Zhihui Industrial Area, Xin Gangwan […]

Incinerator 20 Kg Incinerator electrically operated including:  A cage for receipt of biomedical waste;  […]

Model Capacity/Burnning Rate For Hospital SickBed No. Fuel Type Qty. Ready for Shipping New Production  Shipping […]

This model is small-scale waste incineration equipment for small waste output.  Construction is dual/double combustion chamber […]

Hen Burner – – – – – – – – 400 kgs feed per day.a little […]

Basic Info. Model NO.:PLC Incinerator Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover […]

Waste incineration residues C the solid by\products left after waste is burned C can have significant […]

Including:Incinerator: Structure to be specified The mark to be specified Water temperature: 800 to 1000 ° […]

Capacity Not less than 500Kg/hr.Operation 24hr-7days/week continuous operation.Combustion chamber 2 combustion chamber.Temp. First combustion chamber 800-1000 C. Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C.Combustion Efficiency 99.99%Retention time Of the flow gases not less than 2 Sec in the hot portion.Excess Oxygen concentration Of primary combustion chamber 3-6% max. Refractory The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than 1400 C for the first combustion chamber, and not less than 1600 C for the secandry combustion chamber, and at the same time prevent the Temp. of the outside body of the chamber not higher than 70 C.Doors Should be lined with the same bricks, and the edges lined with special suitable insulating material to prevent any gas escaping, and the doors should be kept under negative pressure during the operation.Air Emission Control System With high destruction and removal efficiency (DRE). Not less than 99.9999 as per KEPA.Wet System If the system equiped with a CEMS washing the flow gas with water, then it should be manufactured from suitable anti corrossion materials, and equiped with pH meter to measure and neutralize the water. It should be able to use the water in closed recycled circuit many times before treating/ discharging into the sewage system in compliance with KEPARS.Chemical dosing It should be equiped with suitable autochemical dosing system to control the pH for the water of the wet scrubber system including sensors.Chimney It should be suitable with the capacity and the technical specifications, with height not less than 12m from ground level. With easy opennable sampling point equal about 3 inch, and the optimum sampling locations is at least 8D downstream direction and 2D upstream from any flow disturbancies.Sampling point […]

Items/Model TS300(PLC) Principle Waste Incineration Treatment Burn Rate Average 250 kg/hour Control Mode PLC(Programmable Logic Controller […]

Average 30kgs per hour ***Primary chamber(200Liters) *** Secondary chamber *** Mix combustion chamber *** Stainless steel […]

air retention for at least 2 seconds at a temperature of less than 850C, the combustion […]

Portable Incineration Unit: A Reliable Solution for Waste Management in Remote and Critical Locations Managing waste […]

A medical waste incinerator is a specialized high‑temperature furnace designed to safely treat and dispose of […]